Outlets and Switches | Hampton Roads

Outlet, switch, and GFCI installation in Hampton Roads, with no guesswork.

We show you what each outlet and switch needs. You decide what is best for your home.

What does outlet and GFCI installation include?

Outlet and switch installation covers replacing worn outlets and switches, adding new outlets where you need them, and installing GFCI protection, dimmers, smart switches, and weatherproof outdoor outlets. Current Contracting checks each circuit first, explains what it can carry and what code calls for, and puts the work and cost in writing across Hampton Roads.

Stakes

Is every outlet in your home doing the job it should?

A loose outlet that will not hold a plug is easy to ignore. Until it starts to feel warm.

And an outlet without GFCI protection looks just like one that has it. Would you know which is which?

VALUE

What you get before any outlet or switch goes in

Clarity.

You will know which outlets need work, where GFCI protection is missing, and why.

The right fix.

The right device for the circuit and the room. Not a new outlet on a circuit that is already full.

A plan in writing.

The work and the cost, before anything starts.

GUIDE

You should not have to guess what is behind the cover plate.

An outlet or a switch looks simple. What matters is the wiring behind it and the circuit it sits on.

We check both, explain what we find, and tell you what the job needs before we start. We handle the permit when the work calls for one.

THE PLAN

How it works

1

Book your free Home Assessment

Tell us which rooms and what you want to add or change.

2

We walk your home with you

check the circuits, and explain what we find.

3

Get a written plan and cost

then decide.

WHY THIS MATTERS

When is it time to replace an outlet or switch?

Not sure if any of these are urgent? That is what the free assessment is for.

WHY THIS MATTERS

Where do you need GFCI protection?

A GFCI shuts off power fast when current leaks where it should not, like through water or a person.

Current code calls for GFCI protection in many wet and damp areas, such as kitchens, bathrooms, laundry areas, garages, unfinished basements, and outdoors. The exact rules depend on the code edition your locality has adopted, and they have changed over the years.

Older homes often have less protection than newer code calls for. We show you where you have it and where you do not.

GFCI outlet or GFCI breaker?

Both protect the circuit. A GFCI outlet resets at the wall. A GFCI breaker resets at the panel. Which one fits depends on the circuit and where you want the reset button to be.

Current Contracting electrician explaining an electrical panel to a Hampton Roads homeowner

THE ZOOM

Dimmer, smart switch, or a standard switch?

Dimmers

LED bulbs need a dimmer made for LED. A mismatch is a common reason dimmed lights flicker or buzz.

Smart switches

Many smart switches need a neutral wire in the switch box. Some older boxes do not have one. We check before you buy.

Standard switches

Sometimes the plain switch is the right answer. We will tell you when it is.

WHY THIS MATTERS

What about outlets outside?

Outdoor outlets need GFCI protection and a weatherproof cover that stays closed while something is plugged in.

Humidity, rain, and salt air are hard on outdoor covers and boxes. We check what is there before we add anything new.

WHY THIS MATTERS

Can you add an outlet where there is not one?

Usually. It depends on how far the nearest circuit is, what that circuit already carries, and what is in the wall.

If the new outlet is for a large appliance, it may need its own circuit.

WHY THIS MATTERS

So what is this going to cost?

It depends on how many devices, what kind, and what the wiring behind them looks like.

Swapping a worn outlet and running a new outlet across a finished room are not the same job.

So we come look, explain what each item needs, and put the cost in writing. There is no charge for the assessment.

WHY THIS MATTERS

Have a short list of outlets and switches?

Send a photo of each one and tell us what you want to change. We will tell you what we see.

Related services

Electrical Troubleshooting & Repairs.

If an outlet stopped working and you do not know why.

Dedicated Circuits & Appliance Wiring.

When the new outlet is for a large appliance.

Outdoor & Security Lighting.

Lights and outlets outside the house.

Kitchen & Bathroom Remodeling Electrical.

Moving outlets and switches during a remodel.

Home Inspection Electrical Repairs.

Missing GFCIs or ungrounded outlets on your report.

FAQ

Common questions about outlets, switches, and GFCIs

Do I need GFCI outlets in my kitchen and bathroom?

Current code calls for GFCI protection in kitchens, bathrooms, and many other wet or damp areas. The exact rules depend on the code your locality has adopted. We will show you where your home has protection and where it does not.

It may be doing its job, catching moisture in an outdoor outlet or a fault in something plugged in. It can also be a worn GFCI. We test it to find out which.

Not by itself if there is no ground wire. Code allows GFCI protection with the right labels as one route, and adding a ground is another. We explain both before anything changes.

Many do, and some older switch boxes do not have one. We check your boxes before you buy the switches.

Usually the dimmer is not made for LED bulbs, or the bulbs are not dimmable. A compatible dimmer often fixes it.

It depends on the job and on your city or county. Permits may be required for new outlets and circuits. We tell you what applies before work starts, and we handle the permit when one is needed.

Want to know which outlets and switches really need attention?

We will check them, explain what we find, and put it in writing. Then you decide.