(757) 816-1406
Backup Power | Hampton Roads
We show you what fits your panel and what you want to run. You decide what is best for your home.
Stakes
When the hookup waits until the storm, it usually does not get done.
And a generator bought before anyone checked the panel can end up the wrong size, or a long and costly run from where it can safely sit.
WHAT YOU GET
You will know if an interlock is made for your panel, and which circuits are worth covering.
We check the interlock first because it costs the least. A transfer switch only if it fits your home better.
The hookup and the cost, before anything starts.
GUIDE
Most people buy the generator first and figure out the hookup later. That is when the surprises show up.
We walk the panel with you, settle which circuits matter, and explain the hookup that fits. We pull the permit and coordinate the inspection.
THE PLAN
There is no charge for it.
check for a compatible interlock, and explain
what we find.
then decide.
WHAT IS IN THE JOB
The least expensive path. A sliding plate on your panel that keeps the main breaker and the generator breaker from being on at the same time. Kits are made for specific panel brands and series. Most panels have one, some do not. You can run any circuit you choose, a few at a time, up to the generator’s capacity.
A separate switch wired to the circuits you pick ahead of time. Simple to use in an outage, but you are limited to those circuits. A good fit when no interlock is made for your panel.
The most expensive path. It switches over on its own, so it needs a permanently installed standby generator that starts itself.
Not sure which one you are looking at? We check your panel before we quote.
You will see people online run a generator into a dryer outlet with a double male cord. Two things can happen.
Power flows back out onto the lines, where it can hurt a lineman working to restore your neighborhood.
And nothing stops utility power from coming back while your generator is running. That is how generators get destroyed and how fires start.
The interlock and the transfer switch exist to make that physically impossible. That is why this is permitted, inspected work.
Decide what you want to run first. Then size the generator to it.
We walk the panel with you and tell you which circuits are worth covering, before you spend money on the generator.
February. We say that plainly because everyone in Hampton Roads calls the same week a storm is named. In that week, nobody can help everyone, us included.
Cost
The interlock is the least expensive path, and the automatic transfer switch is the most. Inside each, the cost depends on your panel and the distance from the generator to it.
The cost most people do not see coming is that distance. It is worth sorting out before you buy a generator, not after.
So we come look, tell you honestly whether an interlock will work on your panel, and put the real cost in writing. There is no charge for the assessment.
Send us a photo of your panel with the door open. We will check whether a compatible interlock exists.
If no interlock fits your panel, or the panel is due.
Storm damage to the service on your house.
Planning both? We look at the panel once.
FAQ
Yes. It is permitted and inspected electrical work, interlock or transfer switch.
Interlock kits are made for specific panel brands and series. Most panels have one, some do not. We check before we quote.
Not usually. You can run any circuit you choose, a few at a time, up to the generator’s capacity. That is what an interlock gives you.
Yes. Automatic switching assumes a permanently installed generator that starts itself.
If a storm is already named, everyone in Hampton Roads is calling the same week.
Call us and we will tell you honestly if we can fit it in. The better time is February.
We will check your panel, explain what fits, and put it in writing. Then you decide.