(757) 816-1406
Panels and Service | Hampton Roads
We show you what your main panel can support. You decide what is best for your home.
An electrical subpanel is a second panel, fed from your main panel, that adds circuit space closer to where you need it, like a garage, workshop, addition, or detached building. It does not add capacity to your service. Current Contracting runs a load calculation first, explains what fits, and puts the plan and cost in writing across Hampton Roads.
Stakes
A subpanel adds room for circuits. It does not add power to the house.
Put a subpanel on a main panel that is already near its limit, and you have moved the problem, not solved it.
WHAT YOU GET
You will know if your main panel can feed a subpanel, and how big it should be.
Sized by a load calculation and planned for where you are headed. Not a panel that is full the day it goes in.
The work and the cost, before anything starts.
GUIDE
A garage shop, an addition, or a detached building is a real project. The electrical plan should come before the walls and the tools.
We run the load calculation with you, explain what it shows, and lay out the plan. We handle the permit and inspection when the job needs them.
THE PLAN
1
Tell us what the new space is for and what you want to run there.
2
run the load calculation, and explain what we find.
3
then decide.
WHY THIS MATTERS
THE ZOOM
More circuit space where you need it, drawing on the capacity your service already has.
More total power for the house, for example 100 amps to 200 amps.
If your service has room, a subpanel may be all you need. If it does not, the upgrade comes first.
WHY THIS MATTERS
A subpanel in a separate building generally needs its own grounding at that building and a feeder with a separate ground wire. Requirements vary by locality.
The feeder often runs underground. Grass is one price. A driveway or patio in the way is another.
WHY THIS MATTERS
Big enough for what you plan to run, with spaces left over. Adding a circuit later is easy when there is room, and hard when the panel is full.
The feeder from the main panel sets how much power the subpanel can carry. Sizing it for where you are headed means you do not run it twice.
WHY THIS MATTERS
It depends on the size of the subpanel, the distance from the main panel, what is in the way, and what your main panel can carry.
A subpanel on the other side of a garage wall and a feeder trenched to a detached workshop are not the same job.
So we come look, run the numbers with you, and put the cost in writing. There is no charge for the assessment.
WHY THIS MATTERS
Send a photo of your panel with the door open, and tell us what the new space is for. We will tell you what we see.
If your service needs more capacity first.
A charger in the garage the subpanel serves.
Circuits for tools and appliances.
Power for a backyard tub.
Lights for a detached garage or workshop.
FAQ
No. It adds room for circuits, fed from the capacity your main service already has. If you need more total power, a service upgrade is the path.
Not always. A few circuits can sometimes come straight from the main panel. A subpanel makes sense when you want several circuits out there, or the run is long.
It depends on the size of your service and what the house already uses. A load calculation answers it.
It depends on what you plan to run there, now and later. We size it from your list and the load calculation.
Generally, yes. A subpanel in a separate building usually needs its own grounding and a feeder with a separate ground wire. Requirements vary by locality.
Generally, yes. Subpanel work usually needs a permit and an inspection, depending on your city or county. We handle the permit when one is needed.
We will run the numbers with you, explain them, and put it in writing. Then you decide.