Home Safety | Hampton Roads

Smoke and carbon monoxide detector installation in Hampton Roads, connected the right way.

We show you what you have and what each area of your home calls for. You decide what is best for your home.

What does hardwired smoke and CO detector installation include?

Hardwired smoke and carbon monoxide detector installation means replacing or adding alarms that run on household power with a battery backup, and connecting them so that when one sounds, they all sound. Current Contracting checks your existing alarms, explains what each area calls for, and installs them for homes across Hampton Roads.

Stakes

If an alarm went off downstairs at night, would you hear it from your bedroom?

Alarms that are not connected only sound where the problem is.

And alarms past their replace by date may not be working the way you think.

Is a carbon monoxide alarm sounding right now?

Get everyone outside into fresh air and call 911. Do not wait to call us. Once you are safe and the source is found, we can help with the alarms.

WHAT YOU GET

What you get before any alarm is replaced

Clarity.

You will know how old your alarms are, which ones are connected, and what each area calls for.

The right fix.

Alarms matched to your wiring and to each other. Not a mix of brands that do not talk.

A plan in writing.

The work and the cost, before anything starts.

GUIDE

You should not have to guess if your alarms will work when it matters.

Most people only think about smoke alarms when one chirps in the middle of the night.

We check every alarm with you, read the dates, test whether they are connected, and explain what we find.

THE PLAN

How it works

1

Book your free Home Assessment

Tell us how many alarms you have and where.

2

We walk your home with you

check each alarm, and explain what we find.

3

Get a written plan and cost

then decide.

WHY THIS MATTERS

How old are your smoke alarms?

Look at the back of the alarm. Most show a date of manufacture, and many show a replace by date.

Many manufacturers recommend replacing smoke alarms about every 10 years. Carbon monoxide alarms often have a shorter life. Check the label, and follow it.

WHY THIS MATTERS

What does interconnected mean?

Interconnected alarms are linked, so when one sounds, they all sound. Hardwired alarms are usually linked by a wire between them.

When running new wire is hard in a finished home, some alarms can link wirelessly. Not every brand works with every other, so we match them.

In older homes where running new wire is not practical, 10 year sealed battery alarms are often the quickest way to get every area covered. Hardwired is best, and we can run new wire when it makes sense. The assessment shows which one fits your home.

Current Contracting electrician explaining an electrical panel to a Hampton Roads homeowner

WHY THIS MATTERS

Where do smoke and CO alarms go?

Code generally calls for smoke alarms in each bedroom, outside sleeping areas, and on every level. CO alarms are generally called for when a home has fuel burning appliances or an attached garage.

Exact requirements vary by locality and by when the work is done. We tell you what applies to your home.

THE ZOOM

Smoke, CO, or a combination alarm?

Smoke alarms

Sense smoke from a fire. Every home needs them.

Carbon monoxide alarms

CO has no smell and no color. An alarm is how you know it is there.

Combination alarms

One device that does both. Useful in hallways near bedrooms. We check that it works with the rest of your alarms.

WHY THIS MATTERS

Why does your smoke alarm keep chirping?

A chirp usually means a low backup battery, or an alarm at the end of its life. Some chirp after a power blip.

If a new battery does not stop it, check the date. It may be time to replace the alarm.

WHY THIS MATTERS

So what is this going to cost?

It depends on how many alarms, whether there is wiring at each spot already, and how they will be connected.

Swapping hardwired alarms one for one and adding new connected alarms to a finished home are not the same job.

So we come look, explain what each area needs, and put the cost in writing. There is no charge for the assessment.

WHY THIS MATTERS

Not sure what you have?

Send a photo of the back of one alarm, with the date showing. We will tell you what we see.

Related services

Home Inspection Electrical Repairs.

Alarms flagged on an inspection report.

Electrical Troubleshooting & Repairs.

An alarm circuit that lost power.

Kitchen & Bathroom Remodeling Electrical.

A remodel can change which alarms are required.

Electrical Subpanel Installation.

Building an addition? Plan the alarms with it.

FAQ

Common questions about smoke and CO detectors

How often should hardwired smoke detectors be replaced?

Many manufacturers recommend about every 10 years. Check the date on the back of each alarm and follow the label.

You can add battery alarms, but replacing a hardwired alarm with a battery only model may not meet code for your home. Requirements vary by locality. Where alarms are already hardwired, we usually replace them with hardwired. In older homes with no alarm wiring, 10 year sealed battery alarms are often the most practical way to cover every area.

Code generally calls for interconnected alarms in new construction and in many renovations. Older homes may not have them. Requirements vary by locality, and either way, interconnected alarms mean every alarm sounds at once.

Generally outside sleeping areas and on each level, especially in a home with fuel burning appliances or an attached garage. Follow the alarm instructions and local code.

Usually the backup battery is low, or the alarm is at the end of its life. If a new battery does not stop it, check the date on the back.

Usually not. Interconnected alarms generally need to be the same brand and a compatible line. We check before we replace any.

Want to know if your alarms will all sound when they need to?

We will check them, explain it, and put it in writing. Then you decide.