Lighting | Hampton Roads

Recessed and indoor lighting installation in Hampton Roads, planned with you.

We show you where the light will land before anything is cut. You decide what is best for your home.

What does recessed lighting installation involve?

Recessed lighting installation means planning where each light goes, checking what is in the ceiling, running the wiring, and setting the switches and dimmers. Current Contracting also replaces ceiling fixtures, adds kitchen lighting, and upgrades older lights to LED for homes in Hampton Roads, with the plan and cost in writing first.

Stakes

What happens if the lights end up in the wrong place?

Recessed lights go into the ceiling. Once the holes are cut, moving one means patching drywall.

Too few, and the room still feels dark. In the wrong spots, and you get glare and shadows right where you work.

VALUE

What you get before the first hole is cut

Clarity.

You will know how many lights, where they go, and why.

The right fix.

Lights sized and spaced for your room. Not a grid copied from the last job.

A plan in writing.

The layout and the cost, before anything starts.

GUIDE

You should not have to guess how the room will look.

Lighting is one of the few electrical jobs you see every day. It should feel right when it is done.

We walk the room with you, mark where the lights go, check the ceiling for joists, ducts, and insulation, and explain what that changes.

THE PLAN

How it works

1

Book your free Home Assessment

Tell us the rooms and what you want the light to do.

2

We walk the rooms with you

check the ceiling, and explain what we find.

3

Get a written plan and cost

then decide.

THE ZOOM

What kinds of indoor lighting do we install?

Recessed lights

New recessed lights in kitchens, living rooms, bedrooms, and hallways. Canless LED or traditional housings.

Ceiling fixtures

Replacing a dated or failing fixture, or swapping a fixture for a new style.

Kitchen lighting

Recessed lights, pendants over an island, and under cabinet lighting for the counters.

LED upgrades

Replacing older fixtures with LED, or LED retrofit trims in recessed cans you already have.

WHY THIS MATTERS

Canless or can lights: what is the difference?

Canless LED lights are thin, with a small driver box that sits above the ceiling. They fit tight spaces well.

Traditional cans take a separate housing, trim, and bulb. They make sense when you want to change the trim later, or match lights already in the house.

Either way, lights that touch insulation need to be rated for it, called IC rated. Under an attic, an airtight rating helps keep conditioned air in the house.

WHY THIS MATTERS

What decides how many lights a room needs?

WHY THIS MATTERS

Will your dimmer work with LED lights?

Not always. LED lights need a dimmer made for LED. A mismatch is a common reason for flicker, buzz, or lights that will not dim all the way.

We match the dimmer to the lights before they go up.

WHY THIS MATTERS

Is there anything in the ceiling you should know about?

Sometimes. Older homes can have wiring in the ceiling that needs attention before new lights go in. Ceilings under a second floor can have pipes and ducts right where you want a light.

We check before we cut, and we tell you if anything changes the plan.

WHY THIS MATTERS

So what is this going to cost?

It depends on how many lights, the type, the ceiling, and how the wiring gets there.

Four lights in an open ceiling under an attic and eight lights under a finished second floor are not the same job.

So we come look, lay it out with you, and put the cost in writing. There is no charge for the assessment.

WHY THIS MATTERS

Have a room in mind?

Send a photo of the room and the ceiling, and tell us what you want the light to do. We will tell you what we see.

Related services

Outlet, Switch & GFCI Installation.

Dimmers and smart switches for your new lights.

Kitchen & Bathroom Remodeling Electrical.

Lighting as part of a full remodel.

Outdoor & Security Lighting.

Porch, garage, and flood lights.

Electrical Troubleshooting & Repairs.

Lights that flicker or stopped working.

FAQ

Common questions about recessed and indoor lighting

How many recessed lights do I need?

It depends on the room size, ceiling height, what you do in the room, and the lights you pick. We lay it out with you on site instead of using a rule of thumb.

Canless lights are thin LED units with a small driver box above the ceiling. Can lights use a separate housing, trim, and bulb. Both work well. The ceiling and the look you want usually decide it.

Yes, with lights rated for insulation contact, called IC rated. Under an attic, an airtight rating also helps.

It is your call. Warmer light tends to suit living rooms and bedrooms. Cooler light tends to suit kitchens, laundry rooms, and work spaces. Some LED lights let you set it at install.

Yes. If the new fixture is heavier, or is a ceiling fan, the ceiling box may need to change. We check it first.

It depends on the job and on your city or county. New lighting circuits may require a permit. We tell you what applies and handle the permit when one is needed.

Want to see where the light will go before anything is cut?

We will lay it out with you, explain it, and put it in writing. Then you decide.