Circuits and Appliances | Hampton Roads

Dedicated circuits and appliance wiring in Hampton Roads, sized to the appliance.

We show you what the appliance needs and what your panel can carry. You decide what is best for your home.

What is a dedicated circuit?

A dedicated circuit serves one appliance and nothing else, from its own breaker in the panel. Ovens, ranges, dryers, microwaves, refrigerators, and dishwashers often need one. Current Contracting reads the appliance requirements, checks your panel, and puts the wiring plan and cost in writing for homeowners across Hampton Roads.

Stakes

Is your new appliance about to share a circuit it should not?

Plug a microwave into a circuit that already runs the toaster and the coffee maker, and the breaker will let you know.

Wire a range or dryer with the wrong size wire or breaker, and the problem is more than a nuisance trip.

WHAT YOU GET

What you get before the appliance arrives

Clarity.

You will know what the appliance needs, and whether your panel has room for it.

The right fix.

Wire and breaker sized to the appliance and its instructions. Not a shared circuit that trips every morning.

A plan in writing.

The work and the cost, before anything starts.

GUIDE

You should not have to guess if the new appliance will work on day one.

New appliances show up on a delivery date. The wiring has to be ready before they do.

We read the installation sheet with you, check the panel, and explain what the job needs. We handle the permit when the work calls for one.

THE PLAN

How it works

1

Book your free Home Assessment

Tell us the appliance, the model if you have it, and where it goes.

2

We walk your home with you

check the panel and the path for the wire, and explain what we find.

3

Get a written plan and cost

then decide.

WHY THIS MATTERS

Which appliances usually need a dedicated circuit?

Code and the manufacturer instructions decide what each one needs. Requirements vary by locality and by appliance.

WHY THIS MATTERS

Switching from gas to electric?

Going from a gas range or dryer to electric usually means a new 240 volt circuit from the panel. That is the bigger job, and it depends on room in the panel.

Going the other way, a gas appliance often still needs a 120 volt outlet for its controls. The gas line itself is handled by a licensed gas contractor.

WHY THIS MATTERS

Why does your new dryer or range cord not fit the outlet?

Many older homes have 3 prong dryer and range outlets. Current code generally calls for a 4 wire connection on new circuits.

Sometimes the fix is the cord. Sometimes it is the outlet and the wiring behind it. We tell you which one applies to your home.

WHY THIS MATTERS

Does your panel have room?

Every new circuit needs space in the panel and the capacity to carry it. A large appliance on a tight panel may need a load calculation first.

Often there is room. When there is not, we explain the paths, from rearranging circuits to a subpanel or a service upgrade.

WHY THIS MATTERS

What about kitchen and laundry protection?

Newer code editions call for GFCI and AFCI protection on many kitchen and laundry circuits. What applies depends on the code your locality has adopted and the scope of the job. We tell you before the work starts.

WHY THIS MATTERS

So what is this going to cost?

It depends on the appliance, the distance from the panel, what is in the way, and whether the panel has room.

A dishwasher circuit next to the panel and a new range circuit across a finished basement are not the same job.

So we come look, explain what the circuit needs, and put the cost in writing. There is no charge for the assessment.

WHY THIS MATTERS

Already picked out the appliance?

Send the model number or the installation sheet, plus a photo of your panel. We will tell you what the circuit needs.

Related services

Kitchen & Bathroom Remodeling Electrical.

New appliance circuits as part of a remodel.

Electrical Panel Replacement and Service Upgrades.

If the panel cannot carry the new load.

Electrical Subpanel Installation.

More room for circuits in a garage or addition.

EV Charger Installation.

Another dedicated circuit, for your car.

Outlet, Switch & GFCI Installation.

Smaller outlets and GFCI protection.

FAQ

Common questions about dedicated circuits

Does a refrigerator need a dedicated circuit?

Many manufacturers recommend one, and some local codes call for it. It also keeps another appliance from tripping the refrigerator off. We check the instructions and your local requirements.

Built in and over the range microwaves usually do, per the manufacturer instructions. A countertop microwave on a shared kitchen circuit is a common reason breakers trip.

Sometimes. Older outlets are often 3 prong, and new installs generally use a 4 wire connection. The range, the outlet, and the wiring all have to match.

It depends on the dryer. Many electric dryers use a 30 amp, 240 volt circuit, but the nameplate and the installation manual decide it. We size the wire and breaker to match.

New circuits often need a permit, depending on your city or county. Code requirements vary by locality. We tell you what applies and handle the permit when one is needed.

Sometimes circuits can be rearranged to make room. If not, a subpanel or a service upgrade may be the path. A load calculation tells you which.

Want to know what your new appliance really needs?

We will check the panel, explain it, and put it in writing. Then you decide.